GE D25 User Manual Download Page 104

Page: 104 / 170

D25

User's Manual

GE Grid Solutions

104

994-0081-3.00-21

GE Information

Downloading a Configuration,

Continued

Procedure: Download Files

(continued)

Step

Action

Start Download

Type

ENTER

Select

Send Text File

(or comparable command) from program

menus.

Note

: Only Motorola S-Records can be downloaded.

Locate and select file to download.

Press

ENTER

to invoke the download procedure.

Note

: Download may take from 20 to over 45 minutes,

depending on file size and speed of transfer.

Result: The download completes, the

D25S>

prompt appears.

Download OK?

If the transfer is incomplete or stalls, the transfer must be halted and restarted.

Complete

Reboot the D25, watching the display on the PC monitor. Note that the D25’s

monitor speed will return to 9600 bps, if it was changed during the procedure.
If any error codes are displayed, the procedure may have to be repeated.

Summary of Contents for D25











































































































































































Search results

Summary of Contents for D25

Reviews:

Related manuals for D25

Brands by name

Popular brands

GE D25, User Manual

Search results

Summary of Contents for D25

Reviews:

Related manuals for D25

Brands by name

Popular brands