40
41
imPOrtant safeguarDs fOr electrical aPPliances
the appliance is driven electrically. Place the appliance near a suitable wall power
socket to connect the appliance directly to a protected mains power supply with pro-
tective conductor (earth/ground) connected properly. ensure that the voltage rating
of your mains power supply corresponds to the voltage requirements of the appli-
ance (230 v, 50 Hz, Ac, rated for at least 8 A).
the installation of a residual current operated circuit breaker (r.c.c.d.) with a maxi-
mum rated residual operating current of 30 mA in the supplying electrical circuit is
strongly recommended. If in doubt, contact your electrician for further information.
In various foreign countries, the specifications for power supplies are subject to
incompatible norms. therefore it is possible that power supplies in foreign countries
do not meet the requirements for safe operation of the appliance. thus, before ope-
rating the appliance abroad, ensure that safe operation is possible.
• Do not use any external switching device, extension cords, or remote control
systems to avoid hazards due to fire, moving parts, or electric shock.
• DO NOT pour or spill any liquids on or under the appliance or power cord. Do
not immerse the appliance, power cord, or power plug in water or other liquids. Do
not place the appliance on wet surfaces. when liquids are spilled on the base or
power cord immediately unplug the appliance. thereafter, dry the appliance and let
it dry naturally for at least 1 day.
• Always completely unwind the power cord before use. Power cords may never
be knotted, twisted, strained or squeezed. Do not let the plug or power cord hang
over the edge of the table or counter. the power cord may not touch hot surfaces or
sharp edges. Always keep the power cord out of reach of young children. ensure
that no one will pull the appliance by the power cord. take care not to entangle in
the power cord. Always grasp the plug to disconnect the power cord.
mOving Parts – risK Of inJuries
warning!
the »Design coffee Grinder Advanced Plus« is designed for grinding
coffee beans. for this purpose, sharp-edged conical burrs are rotating in the grinding
chamber. thus, improper handling could cause severe injuries and damage.
• Do not insert your hands or any foreign objects (e.g. clothes, brushes, cooking
utensils) in the grinding chamber or the grind outlet, with the appliance connected
to the power supply. Always unplug the appliance before cleaning or moving the
appliance, and before assembling or disassembling any parts.
• Do not attempt to operate the appliance without the bean hopper. Always close
the bean hopper with the provided lid, before operation. Do not attempt to operate
the appliance, if the burrs, lid or bean hopper are damaged, clogged, misaligned
or not completely and properly installed.
• Do not insert your hands or any foreign objects in the bean hopper or grind out
-
let during operation.
• Always ensure to re-assemble the burrs completely and properly according to the
instructions in this booklet, after cleaning and before operation.
technical sPecificatiOns
Model:
»Design coffee Grinder Advanced Plus«
Art.-No.:
42638
Power supply:
230-240 v Ac, 50 Hz
Maximum power consumption:
130 w
length of power cord:
approx. 110 cm
weight:
Approx. 2.34 kg
Dimensions (w x D x H):
Approx. 20.0 x 15.0 x 34.5 cm
capacity of bean hopper:
approx. 340 g
these specifications may change without notice.
