Gasboy SERIES 1000, Operation Manual

Page: 198 / 241

GASBOY Series 1000
23-6 05/29/03
ADDITIONAL RECEIPT PRINTER OPTION - MULTIPLE RECEIPTS
The Multiple Receipts option allows you to configure the number of receipts to be printed for each
receipt request from the Series 1000 reader.
You load the number of multiple receipts using the SC command:
1. At
the
*
prompt, type SC. The usual system configuration prompts appear. (See SC - Load
or Change System Configuration)
2.
Type any new configuration data or press RETURN at each prompt until the system displays:
RECEIPTS PER TRANS: <1-3>:
3.
Type the number of receipts (1-3) to be printed for each card-generated receipt request and
press RETURN.
NOTE: This option affects only the card-generated receipt requests. Requests issued
from the data terminal (GR command), generate single receipts.
4.
If you wish to change additional system configuration parameters, continue to do so.
To exit from system configuration, press CTRL C.
Example:
7'
6)7)87=78)1'32*-+96%8-32
%6)=39796)# =362"=
↵
7-8)23 <<<<"
↵
-(0)1)77%+) ',%67"+%7&3=7)6-)7
↵
,)%(-2+0-2) ',%67"+%7&3=-28)62%8-32%0-2'
,)%(-2+0-2) ',%67"2368,:%00)=*36+)63%(
,)%(-2+0-2) ',%67"0%27(%0)4%
,)%(-2+0-2) ',%67"8)0)
86%-0-2+0-2) ',%67"8,%2/=39
86%-0-2+0-2) ',%67"40)%7)'31)%+%-2
6)')-4874)686%27 "
↵
291&)63*49147 " ↵
4914
3658=4907)7# 365"
↵
4914
3658=4907)7# 365"5 ↵
4907)74)6+%0 "
↵
4914
3658=4907)7# 365"5
↵
4907)74)6+%0 "
↵
4914
3658=4907)7# 365"5
↵
4907)74)6+%0 " ↵
233*8%2/7 "
↵