Gasboy SERIES 1000, Operation Manual

Page: 225 / 241

Commercial Fueling Network (CFN)
05/29/03 A-5
PH, PC COMMANDS
The PH and PC command printouts for CFN systems appear as follows:
4,
%
%
%
<
%
)
4'
FUELING RESTRICTION COMMANDS
For CFN systems, the LF, Load Fuel and PF, Print Fuel commands are different. Also, two new
commands: IF, Initialize Fuel Authorization, and RF, Remove Fuel have been added.
IF - Initialize Fuel Authorization
Use the IF command to initialize the fuel authorization table. This clears any information that may
be present in the table and initializes it so that you can assign your fuel types to authorization
codes using the LF command.
1. At
the
*
prompt, type IF. The system displays INITIALIZE FUEL AUTHORIZATIONS? <Y
OR N>:
2. Type
Y and press RETURN to intialize the table or N to cancel the command. The
*
prompt
reappears.
-*
-2-8-%0->)*9)0%98,36->%8-327# =362"=
↵