Jumpers & Switch Settings
03/07/03
5-3
Switches
DSW1 - Backup Sign-on, Hard Disk Access, Boot Modes
Switches DSW1-7 and DSW1-8 control three things:
•
the site controller mode (BOOT or MONITOR) when the site controller is reset or powered
up.
•
the status of the LED's (NORMAL or SCAN).
•
the site controller mode (BOOT or MONITOR) when the site controller crashes.
•
OPEN, OPEN is the default value for these switches.
DSW1-7 and DSW1-8 Mode Set Switches
DSW2 - Baud Rates
Manager's Keyswitch
The Manager's keyswitch provides security against unauthorized access to particular site
controller commands, especially configure commands. The switch should always be left in the off
position when it is not needed.
Summary of Contents for CFN Series
