manualshive.com logo in svg

Garmin GPS 500, Pilot'S Manual & Reference

The Garmin GPS 500 manual is available for free download at manualshive.com. This comprehensive user manual provides detailed instructions on how to get the most out of your Garmin GPS 500. Explore its features, functionalities, and maximize your navigation experience with this easy-to-follow manual.

Share
Download
background image

GPS 500 Pilot’s Guide and Reference

SECTION 14 – MESSAGES, 

ABBREVIATIONS, & NAV TERMS

14-6

  Set course to [###]°

 - The course select for 

the external CDI (or HSI) should be set to the 

specified course.  The message only occurs when 

the current selected course is greater than 10° 

different from the desired track.

  Steep turn ahead

 - This message appears 

approximately one minute prior to a turn in one 
of the following three conditions: 1) the turn 
requires a bank angle in excess of 25° in order 
to stay on course, 2) the turn requires a course 
change greater than 175°, or 3) during a DME arc 

approach the 

turn anticipation distance exceeds 

90 seconds.

  Stored data was lost

 - All user waypoints, 

flight 

plans, and system settings have been lost due to a 
memory battery failure or system reset.

  Terrain

 - See Section 10.3 & 11.3 for complete 

list of TAWS and TERRAIN related Alerts and 
Annunciations.

  Terrain configuration conflict

 - The hardware 

configuration does not match the terrain software 
configuration.  The  operational status of the 
terrain components is unknown and the unit 
should be returned to a Garmin dealer for service.

  Terrain configuration has changed

 - The 

software has detected a change in the terrain 
configuration.

  Terrain has failed

 - The terrain functionality 

self-test has failed.  The  operational status of 
the terrain components is unknown and the unit 
should be returned to a Garmin dealer for service.

  Timer has expired

 - The count down timer has 

reached zero.

  Traffic device needs service

 - Either the TCAD 

battery or the TCAD interrogation device has 

failed.  If the message persists, contact a Garmin 
dealer for assistance.

  Unit configuration has changed

 - The GPS 

500 has detected a failure (during initial power 
up) in its system configuration.  Some system 

components may be unusable.  Try cycling power 
off and back on. If the message persists, contact a 
Garmin dealer for assistance.

  User card format unknown

 - A data card has 

been inserted, but the format of the card is not 

recognized.

  Waypoint already exists

 - The name just 

entered for a user waypoint already exists in 

memory.

  Waypoint(s) have been replaced

 - One or more 

user waypoints were updated during a unit-to-
unit crossfill operation.

  Waypoint memory is full

 - The pilot has used 

all 1000 user waypoint locations in the GPS 500’s 

memory.  Delete unwanted waypoint to make 

room for new entries.

190-00181-60  Rev. G

Summary of Contents for GPS 500

































































































































































































































































Reviews:

No comments

Related manuals for GPS 500

KBS PEGASO Installation And Use Manual preview
PEGASO
Brand: KBS Pages: 67
ifi JOLLY Series Use And Maintenance Manual preview
JOLLY Series
Brand: ifi Pages: 40
Arktic 233306 User Manual preview
233306
Brand: Arktic Pages: 92
COBHAM 806-005 Installation And Operation Manual Supplement preview
806-005
Brand: COBHAM Pages: 16

Brands by name

Popular brands

Load more brands