manualshive.com logo in svg

Garmin GPS 500, Pilot'S Manual & Reference

The Garmin GPS 500 manual is available for free download at manualshive.com. This comprehensive user manual provides detailed instructions on how to get the most out of your Garmin GPS 500. Explore its features, functionalities, and maximize your navigation experience with this easy-to-follow manual.

Share
Download
background image

GPS 500 Pilot’s Guide and Reference

11-10

SECTION 11 

TAWS

‘FIVE-HUNDRED’ AURAL ALERT

The purpose of the aural alert message “Five-Hundred” 

is  to  provide  an  advisory  alert  to  the  pilot  that  the  air-

craft is 500 feet above terrain.  When the aircraft descends 
within 500 feet of terrain, the aural message “Five-Hun

-

dred” is generated.  There are no display annunciations or 

pop-up alerts that accompany the aural message.

TAWS NOT AVAILABLE ALERT

TAWS  requires  a  3-D  GPS  navigation  solution  along 

with  specific  vertical  accuracy  minimums.    Should  the 
navigation solution become degraded or if the aircraft is out 

of the database coverage area, the annunciation ‘TER N/A’ 
is generated in the annunciation window and  ‘TERRAIN 
NOT AVAILABLE’ is generated on the TAWS Page (Figure 
11-10).  The aural message “TERRAIN Not Available” is 
generated.    When  the  GPS  signal  is  re-established  and 

the  aircraft  is  within  the  database  coverage  area,  the  

‘TER  N/A’  visual  annunciation  is  removed  (there  is  no 
associated aural message).

Figure 11-10: TAWS NOT AVAILABLE Display

TAWS FAILURE ALERT

TAWS  continually  monitors  several  system-critical 

items such as database validity, hardware status, and GPS 
status.    If  the  terrain/obstacle  database  is  not  available, 

the  aural  message  “TAWS  System  Failure”  is  generated 
along with ‘TER FAIL’ in the annunciation window, and 
‘TERRAIN FAILED’ on the TAWS Page (Figure 11-11).

Figure 11-11: TAWS FAILED Display

190-00181-60  Rev. G

Summary of Contents for GPS 500

































































































































































































































































Reviews:

No comments

Related manuals for GPS 500

DASSAULT AVIATION Falcon 2000EX EASy Manual preview
Falcon 2000EX EASy
Brand: DASSAULT AVIATION Pages: 40
ViewSonic TD2240 User Manual preview
TD2240
Brand: ViewSonic Pages: 26
Royal-Kincool Anvil DGHV0540 Instruction Manual preview
Anvil DGHV0540
Brand: Royal-Kincool Pages: 25
Federal SNR48 Installation & Operation Instructions preview
SNR48
Brand: Federal Pages: 44
Omcan RS-CN-0140-D Instruction Manual preview
RS-CN-0140-D
Brand: Omcan Pages: 20
Bartscher 700202G Original Instruction Manual preview
700202G
Brand: Bartscher Pages: 24
Bartscher A203.097 Instructions For Installation And Use Manual preview
A203.097
Brand: Bartscher Pages: 14
Woodson W.CFC23 Specification, Installation And Operation Manual preview
W.CFC23
Brand: Woodson Pages: 19
Thales AHV1600 Operation And Installation Manual preview
AHV1600
Brand: Thales Pages: 64
New Air NDC-014-SG Product Manual preview
NDC-014-SG
Brand: New Air Pages: 28

Brands by name

Popular brands

Load more brands