Garmin GPS 500 Pilot'S Manual & Reference Download

Page: 141 / 256

GPS 500 Pilot’s Guide and Reference

8-7

SECTION 8

AUX PAGES

5) The flashing cursor moves to the total air

temperature (TAT) field. Use the small and
large

right

knobs to enter the temperature

(Figure 8-10). Press the

ENT

Key when

finished.

Figure 8-10 TAT Selected

6) The flashing cursor moves to the aircraft

heading (HDG) field. Use the small and large

right

knobs to enter the aircraft heading from

the directional gyro or compass. Press the

ENT

Key when finished.

7) With all variables entered, the following

information is provided:

•

DEN ALT - Density altitude

•

TAS - True airspeed

•

WIND - Wind direction and speed

•

HEAD/TAIL WIND - Magnitude of head wind

or tail wind component

NOTE: If the installation includes components
(such as an airdata sensor) to provide any of the
variables above, the Density Alt/TAS/Winds Page
data defaults to the values provided by these
components.

Flight Planning Page: Scheduler

Entering a scheduled message:

1) Select ‘Scheduler’ from the Flight Planning Page,

using the steps described in this section.

2) The flashing cursor highlights the first message

field. If necessary, turn the large

right

knob

to highlight the first blank message field.

3) Use the small and large

right

knobs to enter

the message text. Press the

ENT

Key when

finished. (The GPS 500 stores up to nine
scheduled messages holding 20 characters
each.)

4) The flashing cursor moves to the type field

under the new message. Turn the small

right

knob to display a window of available options
(Figure 8-11): Event, One Time, Periodic. Press
the

ENT

Key to select.

Figure 8-11 Type Field Highlighted

190-00181-60 Rev. G

Summary of Contents for GPS 500

































































































































































































































































Search results

Summary of Contents for GPS 500

Reviews:

Related manuals for GPS 500

Brands by name

Popular brands

Garmin GPS 500, Pilot'S Manual & Reference

Search results

Summary of Contents for GPS 500

Reviews:

Related manuals for GPS 500

Brands by name

Popular brands