Garmin GPS 500 Pilot'S Manual & Reference Download

Page: 146 / 256

GPS 500 Pilot’s Guide and Reference

8-12

SECTION 8

AUX PAGES

If a ‘WARN’ annunciation appears at the bottom

left corner, GPS satellite coverage may be
sufficient, but the GPS 500 has detected a position

error which exceeds protection limits. In this

condition, all GPS navigation data on the GPS 500

is disabled. Use an alternate navigation source.

• Software Versions - Provides software version

information for the operating software within the
GPS receiver, and main processor board.

• Database Versions - Displays the current Jeppesen

database type and expiration date, along with the

version and type of built-in land database.

• Terrain Database Versions - Displays the current

version and area of coverage of each terrain and
obstacle database. If a database is found to be

missing and/or deficient, the TAWS system fails

the self-test and issues a failure message.

Utility Page: Checklists

Creating a checklist:

1) Select ‘Checklist’ from the Utility Page using

the steps described at the beginning of this
section (8.3). Press the

ENT

Key to display a

list of checklists.

2) Press the

MENU

Key to display the Checklist

Page Menu (Figure 8-18). Turn the large

right

knob

to select ‘Create New Checklist?’ and

press the

ENT

Key.

Figure 8-18 Checklist Page Menu

3) Use the small and large

right

knobs to enter

the name of a checklist. Press the

ENT

Key

when finished. (Up to nine different checklists
can be created and stored in the GPS 500.)

4) Use the small and large

right

knobs to enter

each checklist item, followed each time by the

ENT

Key. Each checklist may contain up to 30

line items of as much as 16 characters long.

190-00181-60 Rev. G

Summary of Contents for GPS 500

































































































































































































































































Search results

Summary of Contents for GPS 500

Reviews:

Related manuals for GPS 500

Brands by name

Popular brands

Garmin GPS 500, Pilot'S Manual & Reference

Search results

Summary of Contents for GPS 500

Reviews:

Related manuals for GPS 500

Brands by name

Popular brands