manualshive.com logo in svg

Garmin GPS 500, Pilot'S Manual & Reference

The Garmin GPS 500 manual is available for free download at manualshive.com. This comprehensive user manual provides detailed instructions on how to get the most out of your Garmin GPS 500. Explore its features, functionalities, and maximize your navigation experience with this easy-to-follow manual.

Share
Download
background image

GPS 500 Pilot’s Guide and Reference

8-20

SECTION 8 

AUX PAGES

CDI Scale/Flight Phase:

RAIM Protection:

Auto (oceanic)

4.0 nm

±

5.0 nm or Auto (enroute)

2.0 nm

±

1.0 nm or Auto (terminal)

1.0 nm

±

0.3 nm or Auto (approach)

0.3 nm

Table 8-2  CDI Scales

  An arrival alarm, provided on the CDI/Alarms 

Page, may be set to notify the pilot with a message 
when the aircraft has reached a user-defined 

distance to the final destination (the direct-to 
waypoint or the last waypoint in a flight plan).  
Once the aircraft has reached the set distance (up 
to 99.9 units), an ‘Arrival at [waypoint]’ message 

is displayed.

  The Airspace Alarms fields allow the pilot to 

turn the controlled/special-use airspace message 
alerts on or off.  This does not affect the alerts 

listed on the Nearest Airspace Page or the 

airspace boundaries depicted on the 

Map Page.  It 

simply turns on/off the warning provided when 
approaching or near an airspace.

  An altitude buffer is also provided which ‘expands’ 

the vertical range above or below an airspace.  

For example, if the buffer is set at 500 feet, and 

the aircraft is more than 500 feet above or below 
an airspace, the pilot is not notified with an alert 
message; if the aircraft is less than 500 feet above 
or below an airspace and projected to enter it, the 
pilot is notified with an alert message.  The default 
is 200 feet.

•  ‘Units/Position’ - Allows the pilot to configure 

the displayed data to standard or metric units of 
measure.  This setting applies to distance, speed, 

altitude, fuel, pressure, and temperature.  Also 

provides three 

magnetic variation (heading) 

options: True, Auto, or User-defined.  If ‘Auto’ is 

selected, all track, course and heading information 
is corrected to the magnetic variation computed 

by the GPS receiver.  The ‘True’ setting references 
all information to true north, and the ‘User’ setting 

corrects information to an user-entered value.

  Configuration settings for position format are 

also provided, and the map datum setting is 
shown.  The map datum used in the GPS 500 

is WGS 84.  Note that a map datum that does 

not match the charts can result in significant 

differences in position information.  When using 

the paper charts for reference only, the GPS 500 
still provides correct navigation guidance to the 
waypoints contained in the database, regardless of 
the datum differences.

•  ‘Date/Time’ - Provides settings for time format 

(local or UTC; 10- or 24-hour) and time offset. 

The time offset is used to define current local 

time. UTC (also called GMT or Zulu) 

date 

and time are calculated directly from the GPS  
satellites’ signals and cannot be changed.  To use 
local time, simply designate the offset by adding 
or subtracting the correct number of hours.

•  ‘Display Backlight’ - Allows the pilot to adjust the 

display for optimum viewing in any condition.  

Automatic 

backlighting is available which uses 

a built-in photocell (at the top left corner of 
the display bezel) to make the proper display 

adjustments without any user intervention.  The 
pilot may also select manual control of the display 
contrast and backlighting of the GPS 500’s display.

190-00181-60  Rev. G

Summary of Contents for GPS 500

































































































































































































































































Reviews:

No comments

Related manuals for GPS 500

Federal SN48 Installation & Operation Instructions preview
SN48
Brand: Federal Pages: 26
Panasonic TH42PH20ER Operating Instructions Manual preview
TH42PH20ER
Brand: Panasonic Pages: 55
Panasonic TH42PF20ER Operating Instructions Manual preview
TH42PF20ER
Brand: Panasonic Pages: 24
Panasonic TH42PH20E Service Manual preview
TH42PH20E
Brand: Panasonic Pages: 143
Panasonic TH42PH20E Operating Instructions Manual preview
TH42PH20E
Brand: Panasonic Pages: 55
Panasonic TH42PH20U - 42" PLASMA TV Service Manual preview
TH42PH20U - 42" PLASMA TV
Brand: Panasonic Pages: 5
Castleberry Instruments & Avionics 300-14EL Selection And Installation Manual preview
300-14EL
Brand: Castleberry Instruments & Avionics Pages: 3
Castleberry Instruments & Avionics 900-23EPAR Operator'S Manual preview
900-23EPAR
Brand: Castleberry Instruments & Avionics Pages: 6

Brands by name

Popular brands

Load more brands