Garmin GPS 500 Pilot'S Manual & Reference Download | Manualshive

Page: 117 / 256

background image

GPS 500 Pilot’s Guide and Reference

6-19

SECTION 6

WPT PAGES

Figure 6-37 Reference Waypoint Field Highlighted

4) Use the small and large

right

knobs to enter

the identifier of the reference waypoint.  The
reference  waypoint  can  be  an  airport, VOR,
NDB, intersection, or another user waypoint.
Press  the

ENT

Key to accept the selected

identifier.

5) The cursor moves to the radial (RAD) field

(Figure 6-38). Use the small and large

right

knobs to enter the radial from the reference
waypoint to the new user waypoint. Press the

ENT

Key to accept the selected radial.

Figure 6-38 Radial Field Selected

6) The cursor moves to the distance (DIS) field.

Use the small and large

right

knobs to enter

the distance from the reference waypoint to
the new user waypoint. Press the

ENT

Key to

accept the selected distance.

7) Turn the large

right

knob to highlight ‘Create?’

and press the

ENT

Key.

8) Press the small

right

knob to remove the

flashing cursor.

NOTE:  The GPS 500 allows the pilot to create
a  new  user  waypoint  at  a  defined  radial  and
distance from the present position.  To reference
the present position, follow the preceding steps,
but press the

CLR

Key in Step 4. ‘P.POS’ appears

in  the  reference  waypoint  (REF WPT)  field  to
indicate  that  radial  and  distance  information
references  the  present  position.   The  second
reference waypoint field (REF WPT) is a temporary
reference only, not a reference that is stored with
the user waypoint.  By default, this field displays
a radial from the nearest VOR.  However, the pilot
can select any waypoint by identifier to use as
a reference in this field.  The GPS 500 can store
user-defined  waypoints  which  are  generated
from other equipment in the panel.  For example,
an EFIS equipped with joystick inputs can be used
to create user waypoints which (if the installation
supports this) automatically transfer to the GPS
500.

190-00181-60 Rev. G

«
...
115
116
117
118
119
...
»

Summary of Contents for GPS 500

































































































































































































































































Reviews:

No comments

Related manuals for GPS 500

Brand: Ideal AKE Pages: 75

Brand: ViewSonic Pages: 25

Termofrost AGD3

Brand: SCHOTT Pages: 16

Brand: Woodson Pages: 19

Brand: True Pages: 2

Brand: True Pages: 2

Brand: True Pages: 2

Brand: Evolution Pages: 183

Brand: Castleberry Instruments & Avionics Pages: 3

Brand: Castleberry Instruments & Avionics Pages: 6

Brand: COBHAM Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands