manualshive.com logo in svg

Garmin GPS 500, Pilot'S Manual & Reference

The Garmin GPS 500 manual is available for free download at manualshive.com. This comprehensive user manual provides detailed instructions on how to get the most out of your Garmin GPS 500. Explore its features, functionalities, and maximize your navigation experience with this easy-to-follow manual.

Share
Download
background image

GPS 500 Pilot’s Guide and Reference

11-1

SECTION 11 

TAWS

SECTION 11:  TAWS

 

NOTE:    GPS  500  units  may*  display  either  a 
TERRAIN Page or a TAWS Page, (but not both) 
depending  upon  the  installed  hardware  and 
configuration.

*  Some earlier units are not equipped to support the 

TERRAIN and/or TAWS functionality, so therefore will not 
have a TERRAIN or TAWS page available.

11.1  INTRODUCTION

TAWS  (Terrain  Awareness  and  Warning  System)  is 

a  feature  to  increase  situational  awareness  and  aid  in 

reducing  controlled  flight  into  terrain  (CFIT).    TAWS 
satisfies TSO-C151b Class B requirements for certification.  
Class B TAWS is required for all Part 91 aircraft operations 
with six or more passenger seats and for Part 135 turbine 
aircraft operations with six to nine passenger seats (FAR 
Parts 91.223, 135.154).

TAWS  functionality  is  an  available  feature  found  in 

GPS 500 TAWS units with main software version 6.01 or 
above, along with appropriate hardware upgrades.  TAWS 

provides visual and aural annunciations when terrain and 
obstacles are within the given altitude threshold from the 
aircraft.

Operating Criteria

TAWS requires the following to operate properly: 

  •  The system must have a valid 3-D GPS position 

solution.

  •  The system must have a valid terrain/obstacle/

airport terrain database.

Limitations

 

NOTE:  The data contained in the TAWS databases 
comes  from  government  agencies.    Garmin 
accurately  processes  and  cross-validates  the 
data  but  cannot  guarantee  the  accuracy  and 
completeness of the data. 

TAWS displays terrain and obstructions relative to the 

altitude of the aircraft.  The displayed caution and warning 
alerts are advisory in nature only.  Individual obstructions 

may be shown if available in the database.  However, all 

obstructions  may  not  be  available  in  the  database  and 

data may be inaccurate.  Never use this information for 

navigation or to maneuver to avoid obstacles.  

Terrain  information  is  based  on  terrain  elevation 

information in a database that may contain inaccuracies.  
Terrain information should be used as an aid to situational 

awareness.  Never use it for navigation or to maneuver to 

avoid terrain.

TAWS uses terrain and obstacle information supplied 

by government sources.  The data undergoes verification 

by Garmin to confirm accuracy of the content, per TSO-
C151b.  However, the displayed information should never 

be understood as being all-inclusive.  

TAWS Alerting 

TAWS uses information provided from the GPS receiver 

to provide a horizontal position and altitude.  GPS altitude 

is  derived  from  satellite  measurements.    GPS  altitude  is 

converted to a mean sea level (MSL)-based altitude (GPS-
MSL  altitude)  and  is  used  to  determine  TAWS  alerts.  
GPS-MSL  altitude  accuracy  is  affected  by  factors  such 

as satellite geometry, but it is not subject to variations in 
pressure  and  temperature  that  normally  affect  pressure 

altitude devices.  GPS-MSL altitude does not require local 
altimeter settings to determine MSL altitude.  Therefore, 
GPS altitude provides a highly accurate and reliable MSL 

altitude source to calculate terrain and obstacle alerts.

190-00181-60  Rev. G

Summary of Contents for GPS 500

































































































































































































































































Reviews:

No comments

Related manuals for GPS 500

Wesena eHDD Operator'S Manual preview
eHDD
Brand: Wesena Pages: 9
ViewSonic CDX5552 User Manual preview
CDX5552
Brand: ViewSonic Pages: 62
Bartscher 700206G Instruction Manual preview
700206G
Brand: Bartscher Pages: 91
Kelly Manufacturing RCA 2610-2 P Installation & Operation Manual preview
RCA 2610-2 P
Brand: Kelly Manufacturing Pages: 13
J.P. Instruments FS-450 Pilot'S Manual preview
FS-450
Brand: J.P. Instruments Pages: 28
J.P. Instruments EDM-350 Approved Installation Manual preview
EDM-350
Brand: J.P. Instruments Pages: 46
J.P. Instruments EDM960 Pilot'S Manual preview
EDM960
Brand: J.P. Instruments Pages: 94
ExpoDisplays MultiQuad MQ-F14 Assembly Instructions Manual preview
MultiQuad MQ-F14
Brand: ExpoDisplays Pages: 19
Garmin GPS 150XL Pilot'S Manual & Reference preview
GPS 150XL
Brand: Garmin Pages: 112
Garmin GTN 625 Installation Manual preview
GTN 625
Brand: Garmin Pages: 254
Levil Aviation iLevil 3 AW Manual preview
iLevil 3 AW
Brand: Levil Aviation Pages: 11
Levil Aviation iLevil 3 SW Instruction Manual preview
iLevil 3 SW
Brand: Levil Aviation Pages: 11
Levil Technology iLevil 2 SW Instruction Manual preview
iLevil 2 SW
Brand: Levil Technology Pages: 12
Alto-Shaam CC-72/BKR Installation Operation & Maintenance preview
CC-72/BKR
Brand: Alto-Shaam Pages: 21
Alto-Shaam HALO HEAT ED2-60 Installation Operation & Maintenance preview
HALO HEAT ED2-60
Brand: Alto-Shaam Pages: 22
Alto-Shaam ED-48/P Operation And Care Manual preview
ED-48/P
Brand: Alto-Shaam Pages: 33

Brands by name

Popular brands

Load more brands