Garmin GPS 500 Pilot'S Manual & Reference Download

Page: 120 / 256

GPS 500 Pilot’s Guide and Reference

6-22

SECTION 6

WPT PAGES

User Waypoint Page Options

The following

User Waypoint Page options are available

by pressing the

Key:

• View User Waypoint List? - displays a list of all

user waypoints currently stored in memory.

• Delete User Waypoint? - Allows the pilot to delete

the selected waypoint from memory.

• Crossfill? - Allows the pilot to transfer a user

waypoint to another 400/500 series unit (if
installed). Please refer to Sections 5.1 and 10.1

for detailed information on crossfill.

Viewing a list of all user waypoints:

1) From the User Waypoint Page, press the

MENU

Key to display the User Waypoint Page Menu.

2) Turn the large

right

knob to highlight ‘View

User Waypoint List?’ (Figure 6-42) and press
the

ENT

Key.

Figure 6-42 User Waypoint Page Menu

3) The top of the User Waypoint List indicates the

total number of user waypoints currently used
and available memory. If more user waypoints
are stored than can be displayed on a single
screen, turn the large

right

knob to scroll

through the User Waypoint List.

4) Press the small

right

knob to return to the

User Waypoint Page.

Deleting a user waypoint:

1) Select the desired waypoint on the User

Waypoint Page and press the

MENU

Key to

display the User Waypoint Page Menu.

2) Turn the large

right

knob to highlight ‘Delete

User Waypoint?’ (Figure 6-43) and press the

ENT

Key.

Figure 6-43 User Waypoint Page Menu

3) Press the

CLR

Key to display a ‘delete waypoint’

confirmation window.

4) With ‘Yes?’ highlighted, press the

ENT

Key to

delete the selected user waypoint.

190-00181-60 Rev. G

Summary of Contents for GPS 500

































































































































































































































































Search results

Summary of Contents for GPS 500

Reviews:

Related manuals for GPS 500

Brands by name

Popular brands

Garmin GPS 500, Pilot'S Manual & Reference

Search results

Summary of Contents for GPS 500

Reviews:

Related manuals for GPS 500

Brands by name

Popular brands