Garmin GPS 500 Pilot'S Manual & Reference Download

Page: 108 / 256

GPS 500 Pilot’s Guide and Reference

6-10

SECTION 6

WPT PAGES

Airport Frequency Page Options

The following options are available for the Airport

Frequency Page, by pressing the

Key:

• Select Next FPL Apt? - This option is only

available when a Flight Plan is active. Allows the

pilot to view the frequency information for the

next airport in the active flight plan

• Select Destination Apt? - This option is only

available when a Flight Plan is active. Allows the

pilot to view the frequency information for the
active flight plan destination airport.

Selecting an Airport Frequency Page Menu
Option:

1) With a Flight Plan Active, select the Airport

Runway Page.

2) Press the

MENU

Key to display the Airport

Runway Page Menu.

3) Turn the large

right

knob to highlight ‘Select

Next FPL Apt?’ or ‘Select Destination Apt?’ and
press the

ENT

Key (Figure 6-17).

Figure 6-17 Airport Runway Page Menu

4) The Airport Frequency Page displays information

regarding the next Flight Plan or Destination
Airport.

6.5 AIRPORT APPROACH PAGE

The Airport Approach Page (Figure 6-18) shows the

available approach procedures for the selected airport.

Where multiple initial approach fixes (IAFs) and feeder

routes are available, that information may also be

displayed. A map image provides a layout diagram for

each approach and transition.

To view approach information for a particular airport

on the Airport Approach Page, enter the airport’s identifier
per Section 6.1.

Figure 6-18 Airport Approach Page

Number of Pages in

Current Page Group

Position of

Current Page

within Current

Page Group

Current

Page Group

Airport Identifier,

Symbol, and Type

Map Image

Approach

Procedure

Name

Transitions:

IAF’s, Feeder

Routes, and

Vectors-to-Final

Scrolling through the available approaches
and transitions:

1) Press the small

right

knob to activate the

cursor.

2) Turn the large

right

knob to place the cursor

on the approach (APR) procedure name field.

3) Turn the small

right

knob to display a window

of available approaches for the selected airport
(Figure 6-19). Continue turning the small

right

knob to select the desired approach.

190-00181-60 Rev. G

Summary of Contents for GPS 500

































































































































































































































































Search results

Summary of Contents for GPS 500

Reviews:

Related manuals for GPS 500

Brands by name

Popular brands

Garmin GPS 500, Pilot'S Manual & Reference

Search results

Summary of Contents for GPS 500

Reviews:

Related manuals for GPS 500

Brands by name

Popular brands