Garmin Diamond DA40, Pilot'S Manual

Page: 51 / 538

190-00592-06 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
39
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
The flight timer can be set to count up from zero starting at system power-up or from the time that the
aircraft lifts off; the timer can also be reset to zero at any time.
Setting the generic timer (MFD AUX - Utility Page):
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the
FMS
Knob momentarily to activate the flashing cursor.
3) Turn the small FMS Knob to select the timer counting direction (UP/DN) and press the ENT Key.
4) If a specific starting time is desired:
a) Use the large
FMS
Knob to highlight the HH:MM:SS field.
b) Use the
FMS
Knob to enter the desired time and press the
ENT
Key.
5) Turn the large FMS Knob to highlight ‘START?’ and press the ENT Key to start the timer. The field changes to
‘STOP?’.
6) To stop the timer, press the
ENT
Key with ‘STOP?’ highlighted. The field changes to ‘RESET?’.
7) To reset the timer, press the ENT Key with ‘RESET?’ highlighted. The field changes back to ‘START?’ and the
digits are reset.
Figure 1-35 Timers (AUX - Utility Page)
Setting the flight timer starting criterion:
1)
Use the
FMS
Knob to select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large
FMS
Knob to
highlight the field next to the flight timer.
4) Turn the small FMS Knob to select the starting criterion (PWR-ON or IN-AIR) and pr ess the ENT Key.
Resetting the flight timer:
1) Use the FMS Knob to select the AUX - Utility Page.
2)
Press the
MENU
Key.
3) With ‘Reset Flight Timer’ highlighted, press the ENT Key.