Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-06 Rev. A
34
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
DATE/TIME
The G1000 obtains the current Universal Coordinated Time (UTC) date and time directly from the GPS
satellite signals (shown on the AUX - GPS Status Page, Figure 1-11). System time (displayed in the lower
right corner of the PFD) can be displayed in three formats: local 12-hr, local 24-hr, or UTC. Local time is set
by adding/subtracting an offset (hours:minutes) to/from UTC.
Figure 1-30 System Time (Local 24-hr Format)
PFD
Configuring the system time:
1)
Select the AUX - System Setup Page using the
FMS
Knob.
2)
Press the
FMS
Knob to activate the cursor.
3)
Turn the large
FMS
Knob to highlight the ‘Time Format’ field.
4)
Turn the small
FMS
Knob to select the desired format and press the
ENT
Key to confirm selection. The ‘Time
Offset’ field is highlighted.
5)
Use the
FMS
Knob to enter the desired time offset (±HH:MM) and press the
ENT
Key to confirm selection.
Figure 1-31 Date/Time Settings (AUX - System Setup Page)
Summary of Contents for Diamond DA40
Page 1: ...System Software 0321 20 or later G1000 Integrated Flight Deck Pilot s Guide...
Page 2: ......
Page 537: ......
