190-00592-06 Rev A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
469
ADDITIONAL FEATURES
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
8.7 ELECTRONIC CHECkLISTS
NOTE:
The checklists presented here are for example only and may not reflect checklists actually available
for the Diamond DA40. This material is not intended to replace the checklist information presented in the
AFM or the Pilot Safety and Warning Supplements document.
NOTE:
Garmin is not responsible for the content of checklists. Diamond DA40 checklists are created,
modified, and updated by the aircraft manufacturer.
The optional checklist functions are displayed on two levels of softkeys that are available on any MFD page.
Figure 8-77 Checklist Softkeys
CHKLIST
DCLTR
SYSTEM
MAP
The
DONE
Softkey label changes to
UNDO
when the checklist item is already checked.
EXIT
DONE
SYSTEM
EMERGCY
SHW CHRT
(Optional)
The MFD is able to display optional electronic checklists which allow a pilot to quickly find the proper
procedure on the ground and during each phase of flight. The G1000 accesses the checklists from an SD
card inserted into the bezel slot. If the SD card contains an invalid checklist file or no checklist, the Power-up
Page messages display Invalid Checklist File or Checklist File Not Present and the
CHKLIST
Softkey is not
available.
Accessing and navigating checklists:
1)
From any page on the MFD, press the
CHKLIST
Softkey.
2)
Turn the large
FMS
Knob to select the GROUP field.
3)
Turn the small
FMS
Knob to select the desired procedure and press the
ENT
Key.
4)
Turn the large
FMS
Knob to select the Checklist field.
5)
Turn the
FMS
Knob to select the desired checklist and press the
ENT
Key.
6)
Turn the
FMS
Knob to scroll through the checklist and highlight the desired checklist item. A hollow white box
is used for the checkmark.
The following colors are used for checklist items:
• Blue - Items has not been highlighted
• White - Item is highlighted for checking
• Green - Item has been checked
• Yellow - Warning notes
7)
Press the
ENT
Key or
DONE
Softkey to check the highlighted checklist item. The line item turns green and a
checkmark is placed in the box next to it. The next line item is automatically highlighted for checking.
Press the
CLR
Key to remove a check mark from an item.
Summary of Contents for Diamond DA40
Page 1: ...System Software 0321 20 or later G1000 Integrated Flight Deck Pilot s Guide...
Page 2: ......
Page 537: ......
