Garmin Diamond DA40, Pilot'S Manual

Page: 59 / 538

190-00592-06 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
47
FLIGHT INSTRUMENTS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Vspeeds (Glide, V
R
, V
X
, and V
Y
) can be changed and their flags turned on/off from the Timer/References
Window. When active (on), the Vspeeds are displayed at their respective locations to the right of the airspeed
scale. By default, all Vspeed values are reset and all flags turned off when power is cycled.
Changing Vspeeds and turning Vspeed flags on/off:
1)
Press the
TMR/REF
Softkey.
2) Turn the large FMS Knob to highlight the field of the desired Vspeed to be changed.
3) Use the FMS Knob to enter the desired value. When a speed has been changed from a default value, an asterisk
appears next to the speed (Figure 2-5).
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF field.
5 ) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the
CLR
Key or the
TMR/REF
Softkey.
Figure 2-6 Timer/References Menu
Figure 2-5 Timer/References Window
Turning all Vspeed flags on/off:
1) Press the TMR/REF Softkey.
2) Press the MENU Key.
3)
To activate all Vspeed flags, press the
ENT
Key with All References On highlighted.
4)
To remove all Vspeed flags, turn the
FMS
Knob to highlight All References Off and press the
ENT
Key.
Restoring all Vspeed defaults:
1) Press the TMR/REF Softkey.
2)
Press the
MENU
Key.
3) Turn the FMS Knob to highlight Restore Defaults and press the ENT Key.