Garmin G1000 Pilot’s Guide for Diamond DA40/40F
190-00592-06 Rev. A
398
AUTOMATIC FLIGHT CONTROL SYSTEM
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
NOTE:
Support for WAAS precision approaches is available only in installations with GIA 63W IAUs when
WAAS is available.
Flying a RNAV GPS approach with vertical guidance:
1)
Arm flight director modes for a RNAV GPS approach with vertical guidance:
a)
Make sure the navigation source is set to GPS (use
CDI
Softkey to change navigation source).
b)
Select the Runway 35R LPV approach for KCOS. Load and activate the approach into the flight plan.
2)
Press the
APR
Key once clearance for approach has been received. GPS Approach Mode is activated and
Glidepath Mode is armed.
3)
Once the glidepath is captured, Glidepath Mode becomes active. The flight director now provides guidance to
the missed approach point.
4)
There are two options available at this point, as the autopilot flies the approach:
• Push the
AP DISC
Switch at the Decision
height and land the aircraft.
• Use the
GA
Switch to execute a missed
approach.
4
GPS APR/
G
P
M
ode
FALUR
1
2
3
GPS NA
V Mode
KCOS
HABUK
PYNON
CEGIX
Figure 7-38 LPV Approach to KCOS
Summary of Contents for Diamond DA40
Page 1: ...System Software 0321 20 or later G1000 Integrated Flight Deck Pilot s Guide...
Page 2: ......
Page 537: ......
