Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-06 Rev. A
186
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Selecting a nearby airport as a direct-to destination:
1)
Press the
NRST
Softkey on the PFD; or turn the
FMS
Knob to display the Nearest Airports Page.
2)
Select the desired airport (the nearest one is already selected).
3)
Press the
Direct-to
Key.
4)
Press the
ENT
Key. The cursor is now displayed on ‘ACTIVATE?’.
5)
Press the
ENT
Key again to activate the direct-to.
Direct-to destinations may also be selected by using the pointer on the navigation map pages. If no airport,
NAVAID, or user waypoint exists at the desired location, a temporary waypoint named ‘MAPWPT’ is automatically
created at the location of the map arrow.
Selecting a waypoint as a direct-to destination using the pointer:
1)
From a navigation map page, press the
Joystick
to display the pointer.
2)
Move the
Joystick
to place the pointer at the desired destination location.
3)
If the pointer is placed on an existing airport, NAVAID, or user waypoint, the waypoint name is highlighted.
4)
Press the
Direct-to
Key to display the Direct-to Window with the selected point entered as the direct-to
destination.
5)
Press the
ENT
Key. The cursor is now displayed on ‘ACTIVATE?’.
6)
Press the
ENT
Key again to activate the direct-to.
Cancelling a Direct-to:
1)
Press the
Direct-to
Key to display the Direct-to Window.
2)
Press the
MENU
Key.
3)
With ‘Cancel Direct-To NAV’ highlighted, press the
ENT
Key. If a flight plan is still active, the G1000 resumes
navigating the flight plan along the closest leg.
Summary of Contents for Diamond DA40
Page 1: ...System Software 0321 20 or later G1000 Integrated Flight Deck Pilot s Guide...
Page 2: ......
Page 537: ......
