Gardsman CTC-1052RV, User Manual

Page: 13 / 39

10
z
The fault situation includes Low Battery
Fault (for both CTC-1052RV and Devices)
and AC Failure.
Command 33
Help Arrived Signaling
This function is only available for the digital
Contact ID reporting method.
z
It is used for the Monitoring Center
personnel to confirm if the help has arrived
for the user or not.
z
If Help Arrived Signaling is set to ON , once
the Alarm Reporting is completed, the
RED HELP BUTTON will start to flash.
Press the GREEN RESET BUTTON when
the Help arrives, and CTC-1052RV will
report to monitoring center and the RED
BUTTON will stop flashing.
z
If Help Arrived Signaling is set to OFF ,
once the Alarm Reporting is completed,
CTC-1052RV will return to idle mode.
Function Selection Result
(0)
OFF
(Disable)
(1)
ON
(Enable)
z
Factory Default is set as ( 0 ), OFF .
< < N N O O T T E E > >
)
If the GREEN RESET BUTTON is not
pressed within 15 minutes, CTC-
1052RV will send one more
Help Call
report to summon help and inform the
Monitoring Center that no help has
arrived within the past 15 minutes.
Command 34
Emergency Button Enable
z
The RED HELP BUTTON can be enabled
or disabled to send an Emergency alarm
report:
Function
Selection
Result
(0)
OFF
(Deactive)
(1)
ON
(Active)
z Factory Default is set as (1), ON .
< < N N O O T T E E > >
)
When this function is programmed as
OFF , the RED HELP BUTTON is
deactivated.
)
When this function is programmed as
ON , the RED HELP BUTTON is
activated. When pressed, it will send
an Emergency alarm report to the
Monitoring Station.
Command 35
Silent Mode
z
CTC-1052RV can be selected to operate in
Silent Mode. This will mute all normal
operation
warning beeps , guard time
tone , key tone and ring .
<
<
N
N
O
O
T
T
E
E
>
>
)
In silent mode, the speaker still
functions normally for two-way voice
communication.
Function
Selection
Result
(0)
ON
(Silent)
(1)
OFF
(Normal)
z
Factory Default is set as ( 1 ), OFF .