26
Speech Reporting Method
z
If Speech Reporting Method is selected,
after dialing, CTC-1052RV will open a two-
way voice communication between the
Call Recipient and CTC-1052RV for 1-10
minutes (set by Command #46).
z
If the alarm is triggered by Talking
Pendent (WTRV or WTRVS), after the
Central Monitoring Station acknowledges
the signal emitted from WTRV/WTRVS
and then WTRV/WTRVS receives the
DTMF
2
signal (pressed by the Monitoring
Center), a remote two-way voice
communication between the Monitoring
Center and WTRV/WTRVS will be opened.
z
At 20 & 10 seconds before the time period
expires, CTC-1052RV will emit two beeps
via the telephone handset to alert the user.
z
If the Call Recipient needs more talk time,
they can press any keys except 9 on their
phone set to add another 1-10 minutes
(set by Command 46).
z
To terminate the call, press either (
DTMF
9
)
or
RESET
button on CTC-1052RV.
z
During the Speech period, if there is no
any DTMF command pressed, the call will
automatically hang-up and be recorded as
an unsuccessful call. It will retry a max of
4 times on each Tel. Number accordingly.
z
To terminate the call, press either (
DTMF
9
),
RESET
button on CTC-1052RV Pro, or
hold the
Pendent Button
for 5~8 sec on
the Talking Pendant (WTRV).
Call Sequence
The call sequence is followed by Tel.
#1, Tel. #2, Tel. #3 to Tel. #4. It is
recommended to set digital reporting
method in first priority for immediate
help.
If either Digital Alarm reporting or
Speech Alarm reporting is set, with
anyone answered successfully, the
call sequence will be terminated
automatically.
If both Digital and Speech Alarm
reporting are set, the reporting call
sequence will
only be terminated
once one Digital reporting (any of CID,
Scancom or Tunstall protocols) and
one Speech reporting are answered
successfully.
There is a calling pause between
each call. For different Tel. Numbers,
the pause is set as 5 secs, and for
same Tel. Number, it is set as 62 secs.
Retry Method:
¾
Retry Circle:
Each Tel. Phone number
can be retried up to 5 times alternative;
and max. 15 calls will be retried. During
the retry period, the Red LED still stays on
steadily, while the Red Help Button
backlight dims.
¾
In the retry circle, if any digital, voice
message, or speech reporting fails, CTC-
1052RV makes a 10-min pause, then
starts another 15-call retry circle, followed
by another 10-min pause. This cycle
repeats until all reporting is/are answered
successfully.
¾
During the 10-min pause, CTC-1052RV
returns to normal mode with Red LED on:
Press the Green reset button to
terminate the reporting.
If new event happens, CTC-1052RV
starts the reporting immediately.
If an alarm is triggered by Talking Pendant
(WTRV):
For Tel number(s) set as Digital
Method (set by Command #20-
24), the WTRV will wait for
Central Monitoring Station’s
DTMF command after digital
reporting is complete.
For Tel number(s) set as Speech
Method (set by Command #20-
24), the WTRV will open a
remote two-way voice
communication.
4.4. Walk Test (Range Test)
Put CTC-1052RV in
Learning Mode
to
determine the operation range of the devices.
Step 1.
From Idle mode, press and hold the
RESET
button for 6 seconds.
Step 2.
Once pressed, a button beep sound
will be heard. CTC-1052RV will emit
one short beep at 3 sec., then a
double beep when it reaches 6 sec.
Step 3.
Release the button after you heard the
Summary of Contents for CTC-1052RV
Page 1: ...E1 MAR 30 2011...
