3
1.3. Insert GPRS/GSM SIM
Card
CTC-1052RV Panel features built-in
GPRS/GSM communication facility to report to
the Monitoring Station.
z
To Insert SIM card:
<
<
N
N
O
O
T
T
E
E
>
>
)
It is recommended to disable the SIM
card PIN code before inserting into the
Control Panel.
The GPRS/GSM SIM card base is located on
the rear side of the unit:
z
Insert the SIM card with the chip side
facing down.
z
Push to the furthest extend, then press on
the edge of the SIM card firmly to secure it.
z
SIM Card will delete its SMS message
whenever the CTC-1052RV is powered on.
z
To remove SIM card:
Press and release on the edge of SIM card, the
card will spring out.
1.4. How to install the Control
Panel
Locating a suitable position for the
Control Panel
z
The Control Panel requires main power
and a constant GPRS/GSM reception.
z
The Control Panel should be easily
accessible.
z
The Control Panel should not be placed in
a damp location, such as a bathroom.
z
The Control Panel should not be placed
close to any heat source, such as
microwave ovens, which can reduce
signal strength.
z
The Control Panel should not be located
alongside other radio transmitting devices,
such as mobile phones, cordless phone,
or wireless computer network (Wi-Fi)
devices.
z
Important: When drilling into a wall, ensure
there are no hidden cables or pipes.
Mounting the Control Panel
The Control Panel can be mounted on the wall
or wherever desired (e.g. on the table). Ensure
the Control Panel is fitted at approximately
chest height where the buttons, microphone,
and speaker can be easily accessed and
operated.
z
Use the 2 holes of the Wall Mounting
Bracket as a template, mark off the holes’
positions.
z
Drill 2 holes and insert the wall plugs if
fixing into plaster or brick.
z
Screw the base to the wall.
z
Hook the Control unit onto the Wall
Mounting Bracket (holding the unit with
the front facing you).
1.5. Compatible with Climax’s
SMS Editor
CTC-1052RV is compatible with Climax’s SMS
Editor, which is designed to facilitate SMS
remote programming via a PC. This tool allows
you to program the panel easily from your
computer, without sending complex SMS text
messages from a mobile phone.
Summary of Contents for CTC-1052RV
Page 1: ...E1 MAR 30 2011...
