24
designed shortcut function, please press
DTMF keys over 1 second to enable the
function you desire.
If the levels of speaker volume and
microphone are adjusted in the two-way
or talk-only communication mode, please
note that these two levels will return to
preset values after ending a call.
If Command #38 is set as
0
, Follow-On, or
2
,
Follow-On & Call-Back, it will then follow its
setting as in Command #45,
Follow-On
Choice
to open Two-way Voice, or, Listen-In,
or just waiting for commands.
z
Follow On Operation
Please note that if an alarm is triggered by
WTRV or WTRVS,
for follow-on operation, no
matter what Follow-On choice (
Command 45
)
you have set, the Monitoring Center personnel
have to press the DTMF 2 to open two-way
communication and then the Monitoring Center
can remotely control CTC-1052RV by the
DTMF commands as below:
If an alarm is triggered by pressing the Help
Button on the Panel
, the system will follow
the preset Follow-On Mode (
Command 45
) to
respond accordingly. During the two-way
communication period, the Monitoring Center
can remotely control CTC-1052RV by the
DTMF commands below:
1. CONTACT ID FORMAT:
Enter
(1)
to
TALK ONLY
Enter
(2)
to open
TWO-WAY VOICE
COMMUNICATION
Enter
(3)
to
LISTEN-IN ONLY
End a Call: enter
(9)
to
HANG UP or
just
put the handset back into the
base cradle.
Enter
(7)
to Speaker Volume Control
and then press
(6)
or
(4)
to increase
or decrease the levels of speaker
volume in the “Two-Way” and “Talk
Only” communication modes.
Enter (8) to Microphone Sensitivity
Control and then press (6) or (4) to
increase or decrease the levels of
microphone sensitivity in the “Two-
Way” communication mode.
Press any DTMF key,
except the
designed “hang-up” key (9), to add
another preset communication time.
Please note that when a particular
DTMF key is pressed, its designed
shortcut function will be executed &
the communication time will be
extended at the same time.
<
<
N
N
O
O
T
T
E
E
>
>
)
Please note that if you wish to enable a
designed shortcut function, please press
DTMF keys over 1 second to enable the
function you desire.
)
If the levels of speaker volume and
microphone are adjusted in the two-way or
talk-only communication modes, please
note that these two levels will return to
preset values after ending a call.
2. SCANCOM FORMAT:
Enter
(1)
to
LISTEN-IN ONLY
Enter
(2)
to
TALK
ONLY
Enter
(3)
to open
TWO-WAY VOICE
COMMUNICATION
End a Call: enter (
5
) to
HANG UP or
put the handset back into the
base
cradle.
Enter
(
＊
)
to
TOGGLE
Enter (7) to Speaker Volume Control
and then press (6) or (4) to increase
and decrease the levels of speaker
volume in the “Two-Way” and “Talk
Only” communication modes.
Enter (8) to Microphone Sensitivity
Control and then press (6) or (4) to
increase and decrease the levels of
microphone sensitivity in the “Two-
Way” communication mode.
Press any DTMF key,
except the
designed “hang-up” key (5), to add
another preset communication time.
Please note that when a particular
DTMF key is pressed, its designed
shortcut function will be executed &
the communication time will be
extended at the same time.
<
<
N
N
O
O
T
T
E
E
>
>
)
Please note that if you wish to enable a
designed shortcut function, please press
DTMF keys over 1 second to enable the
Summary of Contents for CTC-1052RV
Page 1: ...E1 MAR 30 2011...
