![background image](http://html1.mh-extra.com/html/gardner-denver/gd-pilot-ts/gd-pilot-ts_original-operating-instructions_3574465053.webp)
Gardner Denver
14 Maintenance Level Functions
53
14.8 Data Recording Using the SD Card
14.8.1
The Data Recording Feature
GD PILOT TS is fitted with a data recording function
(data logger). This function can be used to monitor and
store various compressor parameters. Data created in
the process can be stored on an SD card. This can
assist maintenance personnel in monitoring compressor
performance.
14.8.2
Using the Data Recorder (Data Logger)
The SD card slot is located on the back of the control
panel.
Fig. 55 SD Card Slot Location
1. SD Card Slot
2. LED – Read/Write active
To be able to use the data recorder, you must first
unlock the maintenance level (see chapter 14.1).
1) Touch
the
Settings > SD-Card > Record
Data
tab.
The default setting is
OFF
. The options, which are
displayed when you touch the
Record Data
button,
allow you to record data at 3 second or 60 second
intervals.
Fig. 56 Activating Data Recording Function
When you start recording data, the name of the current
file is displayed on the screen. The status of the SD
card reads
Recording
.
Fig. 57 Selecting Data Recording Time Interval
Caution
When you have finished recording data you must
make sure the
Record Data
option is set to
Off
before removing the SD card. Otherwise the data
files could become corrupted.
Note
If a padlock symbol
appears next to the
Record
Data
button, you will need to re-enter the maintenance
level access code again before you can stop the data
recorder.
SM 1795
1
2
SM 1805
SM 1805