![background image](http://html1.mh-extra.com/html/gardner-denver/gd-pilot-ts/gd-pilot-ts_original-operating-instructions_3574465042.webp)
11 Setting Up Timer Control Operation
Gardner Denver
42
2) Programme the compressor for the morning shift.
Touch
Channel
1
button to set the times and days of
the week for the morning shift. Confirm the entry by
pressing
OK.
Fig. 27 Setting Channel 1
3) Programme the compressor for the evening shift.
Touch
Channel
2
button to set the times and days of
the week for the evening shift.
Fig. 28 Setting Channel 2
Note that each timer channel can cover one 24-hour
period only (00:00 to 24:00). In order to cover the period
00:00 to 01:10 each morning, a third timer channel
would need to be set as shown below.
4) Programme the additionally required third channel.
Key in the settings and confirm your entry by pressing
OK
.
Fig. 29 Setting Channel 3
The channel display will finally be:
Fig. 30 Timer Channels After Setting
5) Touch
Settings > Timer Control > Timer
Start/Stop > Start/Stop Schedule
to see
an overview of timer settings.
Fig. 31 Overview of Timer Channel Settings
Along the “X” axis, the overview shows the hours of
each day between 0:00 and 24:00 and the days of the
week along the “Y” axis. The highlighted areas show
the timer channels which have been programmed.
SM 1798
SM 1797
SM 1792
SM 1802
SM 1800