3Control
panel and display
Gardner Denver
8
3 Control panel and display
Fig. 1 The GD PILOT TS control panel
1. Touchscreen
display
–
Overview & menu access
2. Start button – Starts the compressor
3. Stop button – Stops the compressor
4. Red
LED
(Flashing slowly) – Warning
(Flashing rapidly) – Fault
5. Yellow
LED
(Flashing slowly) – Maintenance required
6. Green
LED
(Steady) – Compressor running
(Flashing) – Compressor in stand-by mode
7. Emergency stop button
3.1 General
This manual describes the GD PILOT TS electronic
controller as used in the EnviroAire 15 - 37 and
EnviroAire 15 - 37 range of compressors.
Compressors can also be supplied with further options
that are not included in the standard package.
3.2
About the controller
This controls all aspects of operation for the
compressor such as:–
compressor starting and stopping
compressor rotational speed control and
loading/unloading in response to variations in air
demand
monitoring of various operating parameters such
as pressures and temperatures
display of any warning/fault messages and
automatic shut-down in the event of a fault
enabling data entry for adjustment of various
operating parameters
keeping track of scheduled maintenance of the
compressor.
SM 1763_GD
7
1
2
3
4
5
6
L
GD PILOT TS
