![background image](http://html1.mh-extra.com/html/gardner-denver/gd-pilot-ts/gd-pilot-ts_original-operating-instructions_3574465064.webp)
15 Base Load Sequencing (BLS) (Optional)
Gardner Denver
64
15.13.4 Circuit diagram
During installation, refer to the terminal numbers shown
on the appropriate connector only, i.e. not to any other
marking on the slaves. The following image shows
examples of all supported hardware models. The GD
Pilot TS can control up to a maximum of 3 slaves.
Fig. 62 Circuit diagram
SM 1946_gd
Signal leads.
Must be wired as
a twisted pair (TP)
Ground (GND)
STD - Module
n/a
n/a
GND
A
B
GD Pilot TS
(Master)
GD Pilot TS
GD Pilot
GD Pilot MK
4 3 2 1
3
2
1
30 31 32
14 15 16
RS485:3
RS485:1
RS485:1
RS485
_