![background image](http://html1.mh-extra.com/html/gardner-denver/gd-pilot-ts/gd-pilot-ts_original-operating-instructions_3574465043.webp)
Gardner Denver
11 Setting Up Timer Control Operation
43
11.4 Enabling Start/Stop Timer Control
Operation
After setting up the timer/s, timer control operation must
then be enabled in
Settings > Control > Timer
Start Enabled
.
Fig. 32 Timer Start Enabled
The
Home
page then also shows that timer control is
enabled.
Fig. 33 Timer Enabled Display on
Home
page
11.5 Setting Timer for p2 Pressure Band
(Alternative Pressure) Operation
As an alternative to the example used above, reduced
pressure is to be maintained (instead of completely
shutting down the station) between 16:10 (4.10 pm) and
16:50 (4.50 pm). The p2 timer would be set up as
follows:
1) Touch
Settings > Timer Control > Timer
Pressure Band p2
The display will change to show eight timer channels.
Each timer channel controls one p2 start time and one
p2 stop time and enables them to be applied to one or
more days of the week.
2) Key in the settings and confirm your entry by
pressing
OK
.
Fig. 34 Setting Channel 1 (p2 timer)
The display will revert to the previous screen.
Fig. 35 Channel 1 (p2 Timer) Set
SM 1790
SM 1773
SM 1794
SM 1796