![background image](http://html1.mh-extra.com/html/gardner-denver/gd-pilot-ts/gd-pilot-ts_original-operating-instructions_3574465048.webp)
13 Setting Up a Replacement Controller
Gardner Denver
48
13 Setting Up a Replacement
Controller
13.1 The Setup Code and Compressor
Data Reference Number
When first applying power to a replacement controller,
you will be prompted to enter:
The
setup
code
This code is 16 characters long and can be found on a
label inside the controller cabinet.
Compressor data reference number
This is a 13-digit number and can be found on the
compressor nameplate. The reference number starts
with the letters “CD”.
Note
Make a note of these details and have them ready to
hand before powering up the controller.
Caution
The setup code and compressor data reference
number are unique to each compressor. Never
attempt to use data from a different compressor.
13.2 Entering the Setup Code and
Compressor Data Reference Number
On applying power to the replacement controller you
will first be asked to select your preferred language.
1) Touch the appropriate button to select the
language, then confirm your selection with
OK
.
An on-screen keypad will then appear on the display.
2) Enter the 16-character code you made a note of
earlier.
3) Touch
the
OK
button to confirm your entry.
Fig. 42 Entering the Setup Code
Once you have entered the setup code, you will be
prompted to enter the compressor identification
number.
4) Enter the 13-character number you made a note of
earlier. Touch the
OK
button to confirm your entry.
Note
The
OK
button will not appear unless 13 digits are
entered.
Fig. 43 Entering the Compressor Data Reference
number
All settings will then be reset to their default values.
Fig. 44 Warning – Resetting to Defaults
Caution
Always check all GD PILOT TS settings before
starting the compressor after installing a
replacement controller. Restore your own specific
settings. In particular, you must:
reinstate all optional programmable
inputs/outputs connected.
check the settings for the rated pressure of the
compressor.
SM 1812
SM 1813
SM 1814