![background image](http://html1.mh-extra.com/html/gardner-denver/gd-pilot-ts/gd-pilot-ts_original-operating-instructions_3574465051.webp)
Gardner Denver
14 Maintenance Level Functions
51
14.4
Re-set Statistics On-Load Hours
1) Touch
the
Re-Set Statistics
button in the
Trends > Statistics On-Load Hours
Menu.
Fig. 47 Reset On-Load Hours Screen (
shown,
similar)
A dialogue box will appear.
Fig. 48 Reset On-Load Hours Screen (
shown,
similar)
2) Touch
Yes
button.
Figures are re-set.
Fig. 49 Statistics On-Load Hours After Reset
14.5 Reset Service Interval
Note
The yellow LED
on the panel will start to flash slowly
if there are 200 hours or less to the next service. You
will also see the corresponding message in the status
line.
1) Touch
the
Hours to next Service
button in
the
Settings > Hour Meters
Menu.
Fig. 50 Change Service Interval
2) Enter the figure required via the keypad. (Refer to
the “Maintenance” chapter in the compressor user
manual for when the next service is required.)
3) Confirm the entry by pressing
OK.
The new figure is displayed and the
Home
page
updated.
Fig. 51 Updated
Hrs to next Service
figure
SM 1779
VS
SM 1780
VS
SM 1781
SM 1767
SM 1810