de
en
cs
da
es
fi
fr
hu
hr
it
lt
nl
pl
ro
ru
sl
sv
zh
GARANT Safety hose reel
National and regional regulations for safety, accident prevention and environmental protection regulations.
No damaged products are assembled, installed or commissioned.
The necessary protective equipment is provided.
3.5.
PERSONAL PROTECTIVE EQUIPMENT
Comply with the national and regional regulations for safety and accident prevention. Protective work wear appropriate for
the risks associated with the intended activities must be selected, provided and worn.
Wear foot protection, protective gloves, hearing protection and safety glasses.
3.6.
QUALIFICATIONS OF PERSONNEL
Specialists for mechanical work
Specialists in the sense of this documentation are persons who are familiar with assembly work, mechanical installation,
commissioning, troubleshooting and maintenance of the products and who possess the following qualifications:
Qualification / training in the field of mechanics as specified in the nationally applicable regulations.
Trained person
Trained persons in the sense of this documentation are persons who have been trained to perform work in the areas of
transport, storage and operation.
4.
Device overview
A
1
bracket for wall or ceiling mounting
2
safety latch for bracket
3
casing
4
stop ball
5
connection
5.
Assembly
5.1.
WALL OR CEILING MOUNTING
B
ü
Choose wall plugs and screws matching the wall or ceiling
.
1. Release the safety-locking mechanism on the Hose reel, remove the Hose reel from the retaining clip.
2. Position bracket on smooth surface and mark two drilling positions.
3. Drill holes, screw bracket firmly onto mounting surface with suitable screws and wall plugs.
4. Insert the Hose reel from below into the retaining clip, and push down the safety-locking mechanism.
6.
Operation
6.1.
PULLING OUT THE HOSE
C
1. Slowly pull the Hose out to the desired length.
»
Take care to pull the Hose out in a straight line.
2. To stop the Hose, pull on the Hose again until the locking mechanism gives an audible click.
6.2.
CONNECTING
1. Connect Hose reel to the compressed air supply. Connect a suitable pneumatic tool to the pneumatic tool connection.
»
Comply with the respective manufacturer’s operating instructions.
»
Note the hose’s maximum working pressure.
2. Check that all connections are in order.
WARNING! Risk of injury from pressurised hose. Fully relieve hose reel of pressure after every use. Do not
store when pressurised.
6.3.
REELING IN HOSE
D
1. To release fastening, slowly pull Hose until you no longer hear the locking mechanism’s clicking sound.
»
Hose slides back into casing at controlled speed.
2. Guide Hose while it is reeling in.
7.
Maintenance
Interval
Maintenance work
Performed by
Before each use
Check hose, hose guide and ex-
ternal components for visible signs
of wear.
Trained person
12