55
System Setting
Control Device
Configure the settings of the remote control and
keyboard controller.
1. From
<SYSTEM SETUP> - <SYSTEM>
,
select
<CONTROL DEVICE>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the
remote control or use the mouse to set the
connection options for the control device.
>SYSTEM ID : Set the ID of the NVR so that
the keyboard controller can identify.
>PROTOCOL : Set up the protocol of the
keyboard controller.
>BAUD RATE : Specify the RS485 communication speed.
>REMOTE CONTROLLER ID : Set the ID of the remote control.
3. To apply the change, click
<APPLY>
in the bottom of the screen.
4. When done, press the
[EXIT]
button on the remote control or click
<CLOSE>
in the
lower screen. The confirmation message appears and you will return to the previous menu.
Security
For security, you can set to apply reinforced password policy (to system, search/backup)
and control accessing audio and snapshot.
1. From
<SYSTEM SETUP> - <SYSTEM>
,
select
<SECURITY>
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to set each option of
security
>AUDIO SUPPORT: Allows audio function
If set to
<OFF>
, all audio functions are disabled.
Live and playback screen do not produce audio,
and no audio recording is allowed.
Note that changing the setting from
<OFF>
to
<ON>
initializes audio related settings.
Hence, reconfiguration is required after enabling.
>SNAPSHOT SUPPORT: Allows snapshoto function
If set to
<OFF>
, all capturing functions are disabled. User cannot take a snapshot on the
live screen, playback screen and backup player screen.
Event notification with e-mail will not include event snapshot too.
Note that changing the setting from
<OFF>
to
<ON>
initializes snapshot related settings.
Hence, reconfiguration is required after enabling.
>ENHANCED PASSWORD RULE: Sets whether to apply strong password policy, which
prevents using too easy password.
>PASSWORD CHECK WHEN SEARCH/BACKUP: Sets whether to ask password when
attempted search/backup. Set to
<ON>
to ask password when accessing backup menu.
Using
<EXPORT>
on the timeline will ask password too.
3. When done, press the
[EXIT]
button on the remote or
<CLOSE>
in the lower screen to
return to the previous menu.