39
System Setting
Camera Setting
You can configure the camera settings on the NVR screen regarding the camera title, image,
hide/show, and motion.
CAMERA TITLE
You can change the camera title that is displayed
on the screen.
1. From
<SYSTEM SETUP>
-
<CAMERA>,
select
<CAMERA TITLE>.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to select a channel that
you want to rename.
Alternatively, simply double-click the camera to
rename from the top left corner.
Up to
12
alphanumeric letters can be entered.
3. With the virtual keyboard that appears, enter a
camera title and click
<OK>.
4. To apply the change, click
<APPLY>
in the
bottom of the screen.
5. When done, press the
[EXIT]
button on the
remote control or click
<CLOSE>
in the lower
screen.
The confirmation message appears and you will
return to the previous menu.
Camera Setup
Adjust the brightness, contrast, color and quality for each channel to your preference.
1. From
<SYSTEM SETUP> - <CAMERA>
,
select
<CAMERA SETUP>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remo
te control or use the mouse to set each option
of the image menu.
>IMAGE SETTINGS: Configures detailed image
capturing setup for the camera.
>EXPOSURE:Controls the camera
’s exposure
Adaptively to ambient lighting condition of
installed location.
>DIRECT CONFIGURE: Connect to the IP
camera via web to manipulate directly.
When DIRECT CONFIGURE mode started,
You can access the camera by web browser
and control the camera.(ie. fine control of MFZP
lens and FW upgrade of the camera)