67
Record Setting
Continuous Recording
You can configure the settings of: continuous recording time, recording size, frame rate per second
and quality.
1. From the
<RECORD SETUP>
menu, select
<CONTINUOUS MODE>
.
From
<OPERATION MODE>
, you must set
<RECORD SETUP MODE>
to
<MANUAL CONFIGURATION>
before you can set the
<CONTINUOUS RECORDING>
.
2. Use the
[▲▼
◀▶
]
buttons on the remote control or use the mouse to select either
<SIZE/FPS/QUALITY>
or
<SCHEDULE>
.
Size/FPS/Quality Setting
1. Please select the day of the week to perform the
continuous recording. From
<OPERATION MODE>
,
you must set the
<SCHEDULE MODE>
of the
<MANUAL RECORD >
to
<WEEKLY>
before you can specify the
<DAY>
.
2. Click a time cell from which you want to edit the
SIZE/FPS/Quality and drag it to a desired cell.
Or use the
[▲▼
◀▶
]
buttons on the remote control to
move to the cell and press
[ENTER]
. Then, use the
[▲▼
◀▶
]
buttons to move to a desired cell and press
[ENTER]
again.
3. When the cell selection is complete, the "
SIZE/FPS/QUALITY
” table appears.
Specify the
<RESOLUTION>
,
<FPS>
,
<QUALITY>
and use of the <AUDIO> recording for each channel.
>RESOLUTION : set the size of the video recording.
>FPS : set the frame rate per second.
>QUALITY : set the recording quality.
>AUDIO : specify the use of the audio recording.
4. When done, click <OK>.
You can check the recording size in the size table
under the time selection bar.
The video size, FPS, quality and audio recording
options may differ depending on the specification of the IP camera. For some IP cameras, the video
transfer may be interrupted if some of the options are changed.