43
System Setting
> BORDER LINE: specify the display of the cross-border between channels in a split mode
> BORDER COLOR : select a color for the border.
> USER NAME : specify the display of the currently logged-in users on the status bar.
> LANGUAGE : select a menu display language.
3. To apply the change, click
<APPLY>
in the bottom of the screen.
4. When done, press the
[EXIT]
button on the remote control or click
<CLOSE
> in the
lower screen. The confirmation message appears and you will return to the previous menu.
Monitor
If you change from monitoring mode to sequence, you have to set the sequence interval.
1. From
<SYSTEM SETUP> - <DISPLAY>
,
select
<MONITOR>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to set a sequence
interval for auto mode to 1 through 60 seconds.
3. To apply the change, click <APPLY> in the
bottom of the screen.
4. When done, press the
[EXIT]
button on the
Remote control or click
<CLOSE>
in the lower
screen.
The confirmation message appears and you will return to the previous menu.
Sequence
Select a split mode for the sequence, and also select a list of active items when the sequen
ce is performed.
1. From
<SYSTEM SETUP> - <DISPLAY>
,
select
<SEQUENCE>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to add a sequence or
change the settings of the existing sequence.
>ACTIVATION : Select a list that you want to
Activate the sequence for.
Only one list will become active.
>ADD : add a sequence.
3. To apply the change, click
<APPLY>
in the bottom of the screen.
4. When done, press the
[EXIT]
button on the remote control or click
<CLOSE>
in the low
er screen. The confirmation message appears and you will return to the previous menu.
To add a sequence
1. Click
<ADD>
in the bottom of the screen.
2. When the "ADD" dialog appears, enter a title
using the
virtual keyboard.
3. Enter the name of the sequence and click
<ADD>
.
4. When the
<ADD VIEW TYPE>
dialog appears,
click
<ADD>
.
5. When the "SEQUENCE SETUP" dialog appears,
Select
a split mode that you want to add from
<VIEW TYPE>
.