![background image](http://html1.mh-extra.com/html/ganz/nr4hl/nr4hl_user-manual_3428330025.webp)
25
INSTALLATION
PC connection from a remote network
You can connect NVR to a PC or mobile device in the same remote network and control or
manipulate it on the monitor of the PC or mobile device
1. Connect the
[WAN(UPLINK)]
port in the rear panel to the router.
2. Connect the
[WAN(UPLINK)]
port of the router directly to the fixed IP LAN cable,
or connect it to the ADSL modem.
3. If using the router, set the port forwarding and enter the DDNS address in the
address bar (web browser) of the remote PC, or of the dedicated software program
or mobile phone.
For the IP and DDNS address settings, refer
to “Network Setup”
. (page 47)
4. If the MAC address of the NVR is 00-1C-B8-12-34-56 and the web port number is
8080, enter "http://001CB8123456.dvrlink.net:8080" in the address bar of the web
browser.If you have renamed DDNS as “mydvr”, you can make network connection
at
http://mydvr.dvrlink.net:8080
Broadband Router
Local PC
ADSL Modem