６１
System Setting
If an event occurs, this will notify registered users of the event by email. If you do not want
to receive the email, uncheck the
<EMAIL NOTIFY>
option in
<MANAGEMENT>
.
(Page 49)
>ADD NEW EMAIL: If you want to add a new mail
recipient beside the existing ones, click this to add
the recipient.
>MINIMUM EMAIL FREQUENCY: Adjust the minimum
frequency of sending the email. For example, if you
have set the minimum frequency to one minute,
and another event occurs in less than one minute
after the last email sending, the email for the new
event will be sent one minute after.
Some email servers can block the email sending if the email delivery cycle is too short,
and classify it as spam. Contact your email service provider to adjust the minimum
delivery cycle so that the server does not classify the email as spam.
>INCLUDE SNAPSHOT IMAGE: Set whether to include snapshot (still image) or not.
Alarm Sensor
You can configure the settings of the alarm sensor and specify the operation of the sensor if
an event occurs.
1. From
<SYSTEM SETUP> - <EVENT>
, select
<ALARM SENSOR>
.
2. Use the
[▲▼
◀▶
]
buttons on the remote control or
use the mouse to specify the sensor input and
operation.
>NAME : You can specify the name of the alarm sensor.
>OPERATION : You can specify the type of the sensor.
- N/O (Normal Open): Normally the sensor is left Open.
If the sensor switches to Close, an event will be triggered.
-N/C (Normal Close): Normally the sensor is left Close.
If the sensor switches to Open, an event will be triggered.
>LINKED CAMERA : Set the camera to sync with the alarm sensor if it is triggered.
If you have set the alarm recording and the sensor detects the recording, all synchronized
cameras will start alarm recording.
>ALARM OUTPUT : Specify the alarm output channel if it is detected by the alarm sensor.
The alarm will be output to the specified channel.
>PRESET : The camera moves to the selected preset upon detected alarm event.
>BUZZER : Specify the output of the buzzer if an alarm is detected by the alarm sensor.
>VIDEO POPUP : Select to display the video popup if an alarm is detected If there exist
multiple
<LINKED CAMERA>
, the video popup will be displayed in the maximum split mode.
>OSD POPUP : Select to display the OSD popup message if it is detected by the alarm sensor.
>EMAIL : Select to send an email if detected by the alarm sensor.
>FTP: Select to upload event notification into the FTP server if detected by the alarm sensor.
3. To apply the change, click
<APPLY>
in the bottom of the screen.
4. When done, press the
[EXIT]
button on the remote control or click
<CLOSE>
in the
Lower screen. The confirmation message appears and you will return to the previous menu.
