５３
System Setting
System Management
You can check, update or reset the system information.
1.
From
<SYSTEM SETUP> - <SYSTEM>
,
select
<SYSTEM MANAGEMENT>
.
2.
Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to set each option of
the system management.
FW UPDATE
: you can update the current software
with the latest version.
FACTORY DEFAULT
: Return the NVR settings to
the factory default.
SYSTEM DATA
: Save the system settings or get
the system information from other device.
-
SAVE
: Store the NVR settings to a storage device.
Connect the storage device to the USB port of NVR.
-
LOAD
: Apply the settings of the storage device
to the NVR. Connect the storage device to the
USB port of NVR.
PASSWORD
: Open or close the dialog box for
settings of the menus: quit, system settings, record
settings, backup, and search.
If it is set to
<Off>
, note that the ADMIN account
is only effective and access to all menus will be
restricted.
EXPIRED TERM OF PASSWORD
: You will be
prompted to change the current password after a
certain period of time.
AUTO LOGOUT
: If there is no user input for a
certain period of time, you can set to log out
automatically.
WAIT TIME
: Specify the waiting time for Auto
Logout.
PoE POWER LIMIT (HUB)
: Sets the nominal
power
consumption of the external PoE device’s
power adaptor.
AC POWER FREQUENCY
: Set to the actual AC
power's frequency (50Hz / 60Hz) applied to NVR to
avoid flickering.
3.
When done, press the
[EXIT]
button on the remo
te control or click
<CLOSE>
in the lower screen to
return to the previous menu.
