４１
System Setting
3. To apply the change, click
<APPLY>
in the bottom of the screen.
4. When done, press the
[EXIT]
button on the remote control or click
<CLOSE>
in the low
er screen. The confirmation message appears and you will return to the previous menu.
The above options such as
<SENSITIVITY>
and
<MINIMUM BLOCKS>
and how to
set the motion area may be restricted depending on the specification of the connected c
amera.
Motion Area Setup
From the motion setup window, click
<AREA SETUP>
in the right corner to display the are
a setup screen. Setting the motion area may differ depending on the camera model. Below is
a typical setting of the motion area.
1. Click
<AREA SETUP>
to move to the motion
area setup screen.
2. If using the remote control, press the
[ENTER]
button to mark the current position.
3. Use the arrow buttons to move to a desired
block and press
[ENTER]
. The area setup will
begin.
Then, use the arrow buttons to specify the area.
Alternatively, you can use the drag-and-drop
method to specify or release the area as using mouse.
4. If you select the specified area again, it will be released.
5. Press the
[EXIT]
button on the remote control or right-click any area to display the
popup window as in the right picture.
6. From the popup window, move to and specify
the
<SENSITIVITY>
and
<MINIMUM BLOCKS>
for the current channel.
> CHANNEL : select a channel that you specify
the sensitivity and minimum blocks for.
>SENSITIVITY : 1(Low) ~ 10(High) - The higher
the number is, the more higher the sensitivity
level becomes.
>MINIMUM BLOCKS : 1(High) ~ 10(Low) - The
lower the number is, the higher the sensitivity level becomes.
> DAYTIME SET : specify the time period that will be considered as daytime.
> DAYTIME : specify the
<SENSITIVITY>
and
<MINIMUM BLOCKS>
for the daytime.
> NIGHTTIME : specify the
<SENSITIVITY>
and
<MINIMUM BLOCKS>
for the nighttime.
Images recorded in a low contrast scene such as at night cause severe noise, triggering the
motion event too often.
If this is the case, reduce the nighttime sensitivity to a degree.
