57
System Setting
Disk Operations
You can set to delete the recording automatically and set the overwrite options, and you can
also format the HDD
recording data.
1. From
<SYSTEM SETUP> - <STORAGE>
,
select
<DISK OPERATIONS>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to set the operation
conditions of the disk.
>DISK WRITE MODE
- If it is set to
<OVERWRITE>
, the existing
Data will be overwritten by new recording data if the
recording data size exceeds the free space of the HDD.
- If the option is set to
<ONCE>
and the HDD is full, the NVR will stop recording and
output the beep or alarm that is pre-defined at
<EVENT>
.
>RECORDING TIME LIMIT : The recording data will be deleted after a specific time of
reservation. If it is set to
<OFF>
, this function will be disabled.
>DISK FORMAT : format the hard disk.
Note that formatting the HDD will delete all video data and logs.
>ERASE VIDEO: You can delete all or part of
recorded video. Click
<ERASE>
to move to
“ERASE VIDEO” menu. Set the beginning
and ending time and click
<ERASE>
button
to delete video of selected time range.
3. To apply the change, click
<APPLY>
in the
bottom of the screen.
4. When done, press the
[EXIT]
button on the
remote control or click
<CLOSE>
in the lower screen.
The confirmation message appears and you will return to the previous menu.
S.M.A.R.T settings
You can check the S.M.A.R.T information of the disk and specify the check frequency.
What is S.M.A.R.T information?
S.M.A.R.T (Self-Monitoring, Analysis and Report Technology) is to detect a HDD that is
likely to cause a problem in the future with a warning message.
1. From
<SYSTEM SETUP> - <STORAGE
>,
select
<S.M.A.R.T. SETUP>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to check the S.M.A.R.T
operation and specify the check interval.
>S.M.A.R.T STATUS : Read the S.M.A.R.T
information of the disk and check to display
if the current disk is in normal operation.