![background image](http://html1.mh-extra.com/html/ganz/nr4hl/nr4hl_user-manual_3428330049.webp)
49
System Setting
DDNS
You can configure the DDNS settings so that remote users who are connected to the network can
access remotely DDNS is an IP redirection service in a dynamic IP environment that redirects
(maps) the new IP address to a registered domain name
each time the IP address is changed.
1. From
<SYSTEM SETUP> - <Network>
, select
<DDNS>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to specify the use of
DDNS and select a server.
>DDNS : Specify the use of DDNS connection.
>DDNS SERVER : Select a server to connect to.
>NVR NAME : Enter the name of the NVR that you
want to use as DDNS.
>DDNS REGISTRATION TEST : Check if the <
NVR NAME
> can be set as DDNS. If there is a
duplicate name in the server, the registration will fail. If this is the case, rename the
<NVR NAME>
and press Test to check if it works properly.
>USER NAME : Use this field only if you set DDNS server to dyndns.org.
>PASSWORD : Use this field only if you set DDNS server to dyndns.org.
>NVR ADDRESS : Provide the
<NVR NAME>
and press the
<DDNS REGISTRATION
TEST>
button. The name will be added automatically.
>DDNS CONNECTION TEST : Perform the connection test to check if DDNS is normally
registered.
3. To apply the change, click
<APPLY>
in the bottom of the screen.
4. When done, press the
[EXIT]
button on the remote control or click
<CLOSE>
in the lower
screen. The confirmation message appears and you will return to the previous menu.
You can register and test an email address so that an email notification is delivered at a specific
interval or if an event occurs.
1. From <SYSTEM SETUP> - <NETWORK>,
select
<EMAIL>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to specify the use of email
and select a server.
>SERVER : Set up the mail server. Set the mail
Server that will be used for notification to the NVR.
Use the virtual keyboard to enter your mail server.
>PORT : Enter the mail server port.
>SECURITY : If it is set to
<On>
, the email will be transferred in secure mode.
If it is set to
<Off>
, the email will be transferred to a server that does not support SSL.
>USER : Provide the email account (ID) of the sender.
>PASSWORD : Provide the password of the sender.
>TEST EMAIL ADDRESS : Enter an email address for the test purpose.
>TEST : Send a test email and check if the test email is delivered normally.