Operating with HardBoot view
G&D HardBoot plus ·
14
Adding a
HardBoot
system to the location configuration
Each location can consist of any number of
HardBoot
systems that can be adminis-
trated comfortably through the software. Before the
HardBoot
system can be admin-
istrated with the software, several system settings have to be stored in the software
HardBoot view
.
How to establish a
HardBoot
system
within the location configuration:
1. Click
on
HardBoot configuration
(
HardBoot-Konfiguration)
in the
Settings
(
Einstellungen
) menu.
2. Enter the administrator password and confirm the entry by clicking on the
OK
button.
3. Click on the
Add (Hinzufügen)
button. Now, the dialogue window
Settings
HardBoot
(
Einstellungen HardBoot)
appears:
4. The following data have to be recorded in the
General
(
Allgemein
) field of the dia-
logue window:
a.
Name
: Enter the desired name of the
HardBoot
system. This name is displayed
in the graphical interface of the software.
b.
IP address (IP-Adresse)
: Enter the IP address of the
HardBoot
system. If a perma-
nent IP address has been assigned to the
HardBoot plus
, you can read it out in
the configuration menu (see “Network configuration” on page 8 ff).
c.
Username
: Enter the user name of the administrator‘s account of the
HardBoot
system (default setting:
admin
).
d.
Password (Passwort)
: Enter the password of the administrator‘s account of the
HardBoot
system (default setting:
admin
).
The administrator password only needs to be entered if no administrating func-
tion has been called up in the current session.
Figure 7: Dialogue window “Settings
HardBoot”
(Einstellungen
HardBoot
)
