Operating with HardBoot view
19
· G&D HardBoot plus
Switching the power supply
It is possible to both turn on or turn off the power supply of single power outlets or
of a power outlet group at all times. Directly after the switching through the soft-
ware
HardBoot view,
the power supply of the power outlet/group is established or
disconnected by the
HardBoot
system.
How to turn on/off the power supply of a power outlet/group:
1. Within the overview of power outlets, double click on the power outlet/group
that you want to turn on/off.
2. The dialogue
Turn on/off device (Gerät ein-/ausschalten)
displays
the status of the
selected power outlet or power outlet group:
3. Click the
Turn on
(
Einschalten)
or
Turn off (Ausschalten)
button. If you do not want
to switch the power outlet, skip this point.
4. Click the
Close
(
Schließen)
button to close the dialogue.
As an alternative to the double click, the following actions are also possible:
Right-click with the mouse on the power outlet/group and select in the con-
text menu the menu point
Turn on/off device (Gerät ein-/ausschalten) .
Select the power outlet/group and click on the entry
Turn on/off
(
Ein-/Aus-
schalten)
in the
Edit
(
Bearbeiten)
menu.
Figure 13: Dialogue
turn on/turn off the device