Game Composites GB1 GameBird, Maintenance Manual

Page: 156 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
31-6
Airspeed Indicator
Type: 8030B.168
Manufacturer: United Instruments
3625 N Comotara St, Wichita, KS 67226
www.unitedinst.com
Scale 0-260 knots
Markings:
Green arc
55 to 200 knots (V
S
54 knots to V
NO
200 knots)
Yellow arc 200 to 234 knots (V
NO
200 knots to V
NE
234 knots)
Red line 234 knots (V
NE
234 knots)
The airspeed indicator does not require regular maintenance. When defective, get service conducted at
approved facility.
To service the airspeed indicator in the rear instrument panel:
1. Remove GPS antenna and cover
2. Remove screws on the instrument face
3. Maneuver ASI out of instrument panel
4. Pull off pressure connections
5. Get service conducted by approved maintenance facility as required
6. To reinstall, reconnect static and dynamic pressure tubes - tubes and instrument ports are marked ‘s’
/ static and ‘p’ / pitot
7. Maneuver instrument into position
8. Reinstall 4 screws
9. Check for correct installation
10. If required, reinstall cover and GPS antenna; refer to section 34-04
Signature
11. Conduct leak check; refer to section 31-05
To service the altimeter in the front instrument panel:
1. Uninstall front instrument panel, refer to section 39-04
2. Disconnect static pressure tube
3. Remove screws on the instrument face
4. Remove altimeter out of instrument panel
5. Get service conducted by approved maintenance facility as required
6. To reinstall, attach with 4 instrument screws
7. Reconnect static pressure tube
8. If required, reinstall front instrument panel, refer to section 39-04
Signature
9. Conduct pitot-static test, refer to section 31-05