Game Composites GB1 GameBird, Maintenance Manual

Page: 149 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
28-14
Gascolator
Type: ACS High Pressure Gascolator 10585HP
Manufacturer: ACS Products
1585 Copper Drive, Lake Havasu City,
AZ 86403, USA
www.acsproducts.com
To clean the Gascolator:
1 Fuel selector switch to OFF
2 Remove the lock wire; unscrew the body
3 Pull out the filter
4 Clean the filter in fresh fuel, check for contamination
in the filter housing
5 Reassemble in reverse order, secure with Lockwire
6 Fuel selector switch to ACRO, flood system
7 Visually check for fuel leaks
8 Wire lock
Acrotank Fuel Level Sensor
For illustration, refer to section 28-03 .
The Acrotank fuel level sensor is a capacitive unit, the head is mounted in the top of the Acrotank, the sensing
tube protrudes through the main section through the stand pipe into the bottom of the header tank.
5 VDC electrical power is provided from the Engine Data Converter GEA 24, supplied through the Battery
Master (essential bus) and 2A EDC circuit breaker on the circuit breaker panel, located in the RH side console
in the rear cockpit.
Type: Gill 4223-00-3SN-620-D
Manufacturer: Gill Sensors & Controls Limited
Unit 600 Ampress Park, Lymington
Hampshire, SO41 8LW UK
www.gillsc.com
The unit does not require regular maintenance.
If defective, the unit must be replaced.
For wiring and connection details, refer to section
24-03
To service the Acrotank fuel level sensor:
1 Remove cowling, refer to 71-02
2 Remove windshield, refer to 52-02
3 Disconnect electrical connector
4 Remove fasteners
5 Pull sensor unit out of tank
6 Service or replace as required
7 To reinstall, reverse steps 1-5; in addition:
8 If required, replace gasket (delivered with new unit
9 Switch ON Battery Master
10 check indication on MFD1
11 Switch Battery Master OFF
12 Reinstall windshield, refer to 52-02
13 Reinstall cowling, refer to 71-02