Game Composites GB1 GameBird, Maintenance Manual

Page: 129 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
27-29
Rudder pedal adjusters, rear seat – GB1-2723-25-00
To service either rear seat pedal adjuster:
1. Remove rear seat cushion and panel (4 screws)
2. Remove pivot fastener of aft bellcrank
3. Disconnect fasteners on both ends
4. Remove from airplane
5. Remove spring loaded locating pin
6. Slide components apart
7. Clean all components
8. Inspect standard fasteners in accordance with 5-06 , No.1
9. Inspect welded assemblies in accordance with 5-06 , No.5
10. Inspect spherical bearings in accordance with 5-06 , No.3
11. Inspect spacers in accordance with 5-06 , No.6
12. Check spring loaded locating pin for spring force of no less than 50 g. Replace if less.
13. To reinstall, reverse steps 1 – 6
Signature
14. Check for correct installation