Game Composites GB1 GameBird, Maintenance Manual

Page: 134 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
27-34
Uninstall front control stick
1. Remove both seat cushions and seat panels (6 screws front panel, 4 screws rear)
2. Remove baggage bay access panel
3. Disconnect front control stick PTT connector
4. Remove fasteners, remove front control stick
5. Remove fasteners from aft control stick
6. Disconnect interconnecting rod from both control sticks
7. Remove interconnecting rod through baggage bay access hatch
8. Install fasteners for aft control stick
9. Install cotter pins
10. Install both seat panels and seat cushions
Signature
11. Install baggage bay access panel
Uninstall Front Rudder Pedals
1. Remove front seat cushion and seat panel (6 screws)
2. Remove front instrument panel
3. Remove both bump stop assemblies
4. Reinstall fasteners for bump stop assemblies to seal nutplates
5. Disconnect both front pedal adjusters from bellcranks
6. Slide pedals aft, disconnect brake lines from firewall and lines connecting aft- and front pedals from
front brake cylinders
7. Remove pedal assemblies from airplane
8. Connect brake line from rear pedals to firewall
9. Bleed brakes in accordance with section 12-10
10. Install front instrument panel
Signature
12. Install front seat cushion and seat panel
Disconnect Front Seat Engine Controls
1. Remove screws connecting aluminum blocks for front & aft control cables
Signature