Game Composites GB1 GameBird, Maintenance Manual

Page: 120 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
27-20
Rudder pedal adjusters, front seat – GB1-2723-21-00
Proceed as follows to inspect or service:
1. Remove front instrument panel
2. Disconnect fasteners on both ends
3. Remove from airplane
4. Remove spring loaded locating pin
5. Slide components apart
6. Clean all components
7. Inspect standard fasteners in accordance with 5-06 , No.1
8. Inspect welded assemblies in accordance with 5-06 , No.5
9. Inspect spherical bearings in accordance with 5-06 , No.3
10. Check spring loaded locating pin for spring force of no less than 100g. Replace if less.
11. To reinstall, reverse steps 1 – 5
Signature
12. Check for correct installation
13. Reinstall front instrument panel
Signature
14. Check for correct installation
Rudder bellcrank, forward – GB1-2723-31-00
Proceed as follows to inspect or service:
1. Remove front instrument panel
2. Disconnect pedal adjuster
3. Disconnect interconnecting rod
4. Remove pivot fastener
5. Remove bellcrank
6. Clean all components
7. Inspect standard fasteners in accordance with 5-06 , No.1
8. Inspect welded assemblies in accordance with 5-06 , No.5
9. Inspect spherical bearings in accordance with 5-06 , No.3
10. To reinstall, reverse steps 1 – 5
11. Install cotter pins
Signature
12. Check for correct installation
13. Reinstall front instrument panel
Signature
14. Check for correct installation