Game Composites GB1 GameBird, Maintenance Manual

Page: 119 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
27-19
To service either front rudder pedal assembly:
1. Remove brake line, catch spilled brake fluid, cap off brake lines
2. Remove disconnect pedal adjuster
3. Pull back until free of rails, remove assembly from airplane
4. Clean all components
5. Inspect standard fasteners in accordance with 5-06 , No.1
6. Inspect slider in accordance with 5-06 , No.6
7. Inspect spherical bearings in accordance with 5-06 , No.3
8. Inspect rollers in accordance with 5-06 , No.9
9. Inspect welded assemblies in accordance with 5-06 , No.5
10. Master brake cylinders have to be replaced in case of malfunction
11. To reinstall, reverse steps 1 – 4
12. Bleed brakes in accordance with section 12-10
13. Brake check (hard pedals)
Signature
14. Check for correct assembly
To replace either rail:
1. Remove cowling
2. Uninstall windshield
3. Uninstall Acrotank
4. Remove rail fasteners
5. Slide pedal assembly off rail
6. Remove rail from airplane
7. To install new rail, reverse steps 1 – 4
Signature
8. Check for correct installation of rail
9. Reinstall Acrotank
Signature
10. Check for correct installation
11. Reinstall windshield
Signature
12. Check for correct installation
13. Install cowling